HX-SZ600-RGBW-TOUCH

LED RGBWController with full touch remote control

HX-SZ600-RGBW-TOUCH,adopts the advanced micro control unit, it is used for controlling a variety ofLED lamps. For instance, point source of light, flexible light strip and so on;it has many advantages such as touch remote control, easy connection and simplyto use. Meanwhile, you can adjust brightness, static color choices and variousdynamic changes in lighting effects through wireless touch remote control. Andaccording to the actual need of customers, it can carry out jumpy changing,gradual changing, stroboflash and other effects of change.

Especially,HX-SZ600-RGBW-TOUCH designed with Synchronization function. It is convenient touse RJ45 connector to connect the multiple controllers together, and achievethe synchronization function of thousands meters led strips.

Product Feature

l HX-SZ600-RGBW-Touch is constant voltage, suitfor all kinds of the constant voltage LED RGBW lamps.

l There is a RF remote touch control 5functions, 1 color ring and 1 color sense lamp in the center, all buttons arein the touch form, the color ring have 128 levels in different colors. 

l Using RJ45 connector to connect the multiplecontrollers together, and achieve the synchronization function of thousandsmeters led strips.

l There are 9 modes in total, including 2 whitestatic colors and 7 dynamic modes. The brightness of all static color and thespeed of the dynamic modes are adjustable.

l 2-year warranty.

InterfaceSpecifications 

1.Power and load interface:

2.Synchronization function

Multiplecontrollers can work synchronously when connected by network cable through theRJ45 connector.

Directionfor use

This product use RF touch control, with onecolor ring and 5 function buttons.

Tips: Without any operation more than 6seconds, the touch remote will enter the sleep state, please  SHAKE the remote to wake up it before the nextusing.

RF CODE

Tips: Receivercan be controlled by any one the same remote as factory default; full touchremote control delivered with unique RF code as factory default; ifunique-control is needed, please matching the code before installation andusing.

Matchingcode operation

If unique-control or new-coded-remote is needed, pairingthe remote and the receiver as below operation instruction before using:

1.     Step 1: Pressing key “Mode” and hold on, power on the controller, theload LEDs will be 50% brightness white as responding.

2.     Step 2: Continuously to press the key “WhiteColor “ for 3 times within 5 seconds after step 1 ,the brightness of LEDswill change from 25% -10% as responding.

3.     Code learning successfully, the LEDs will be back to the statusbefore the power off, and the receiver only can be control by theremote.

4.     If not, please re-operate from step 1 to 2.

Clear codeoperation

Back to factory default, wall-panel can be controlled byany one the same remote control.

1.      Step 1: Pressing key “Mode” and hold on, power on the controller, theload LEDs will be 50% brightness white as responding.

2.      Step 2: Continuously to press “Speed/Brightness-“3 times within 5 seconds after step 1 ,the brightness ofLEDs will change from 25% -10% as responding.

2.      Code clearing successfully, the LEDs will be back to the statusbefore the power off, and the receiver can be controlled by anyremote control(any one the same remote control can be used to clear the code).

3.       If not, please re-operate from step 1 to 2.

Typical Applications 

Product information for placing order