Led WIFI Controller  appeared with the installation of controlling software on mobile devices with Android or IOS system, such as android phone, iPhone, tablet PCs, they can remote control LED lighting products through WiFi, which makes LED control more intelligent and humanization. One WIFI-V01 controller can be used as dimmer, CT controller, and RGB controller, only need to select the right control interface in the software. In addition, this model has DIY function. Users can get any effect they want based on our controlling software. If you don't have any mobile devices with the controlling software at hand, you also could use RF remote control to control it. This model designed for constant voltage led products, such as led strip, led modules. For controlling more led products, amplifier is available.

Features

l Support both Wi-Fi control of Apple products(iPod, iPad, Iphone), Android mobile devices like Samsung, HTC, and RF14keyswireless remote control.

l With the 3-in-1(Dimming, CT, RGB)apple/android software. One device suit to different lighting applicationscene.

l Memory function to save scenes anytimeanywhere for next play.

l WIFI-V03  is designed for constant voltage led products,working voltage auto fit to DC12-24V.

l Wi-Fi control based on 2.4GHZ frequency, RFremote control based on 433.92MHz. 

l 2 year warranty.

Tips: Receivercan be controlled by any one the same remote as factory default; RF BT remotecontrol delivered with unique RF code as factory default; if unique-control isneeded, please matching the code before installation and using.

Matchingcode operation

If unique-control or new-coded-remote is needed, pairingthe remote and the receiver as below operation instruction before using:

1.     Step 1: Pressing key “set” and hold on, power on the controller, the load LEDswill be 50% brightness white as responding.

2.     Step 2: Continuously to press the key “Modekey“ for 3 times within 5 seconds after step 1 ,the brightness of LEDs willchange from 25% -10% as responding.

3.     Code learning successfully, the LEDs will be back to thestatus before the power off, and the receiver only can be control bythe remote.

4.     If not, please re-operate from step 1 to 2.

Clear codeoperation

Back to factory default, wall-panel can be controlled byany one the same remote control.

1.      Step 1: Pressing key “set” and hold on, power on the controller, the load LEDswill be 50% brightness white as responding.

2.      Step 2: Continuously to press “Delaybutton“ 3 times within 5 seconds after step 1 ,the brightness of LEDs willchange from 25% -10% as responding.

3.      Code clearing successfully, the LEDs will be back to the statusbefore the power off, and the receiver can be controlled by anyremote control(any one the same remote control can be used to clear the code).

4.      If not, please re-operate from step 1 to 2.

Productinformation for placing order